|
Post by Kozma Minin on Oct 12, 2015 21:44:45 GMT -5
I found appropriate decals by Microscale. I just needed to imply the part that is still visible
|
|
|
Post by Kozma Minin on Oct 17, 2015 12:10:59 GMT -5
There are screens welded over the large side windows and end door windows. I found fine screen from a 12" diameter frying thing used for … frying food on the stove, to replicate this. I measured and cut the parts then spray painted ruddy red primer
|
|
|
Post by Kozma Minin on Oct 23, 2015 22:48:13 GMT -5
|
|
|
Post by Kozma Minin on Dec 26, 2015 22:24:36 GMT -5
While in Atlanta, this model was handled a lot for running on a temporary running layout. UP 25831 has since returned (in great condition, Mr. Cole Only runs a tight ship). Now I want to include the corner nite-lights and extra coupler and rack. These corner nite-lights will be added now. Digging through my spare parts I find what I'm looking for and the perfect solution. The old Revell kit No. 8308. A lot of parts that I never used still on the sprue. I'll be using these parts for the circular shape of them. cut out and shaped to fit done The spare coupler part and rack needed to be made so these parts also supplied these. dry fit in place before paint. thanks for looking…
|
|
|
Post by Kozma Minin on Jan 13, 2016 23:38:24 GMT -5
For the power generator, I used electrical tape that I sliced in thin strips. I glued one end to the pulley wheel with CA then pulled it around the other then back again and then glued that end with CA. The following final shots show the added details: corner night-lites extra coupler belt and pulley system head and tail light boxes on each end near the doors
|
|
|
Post by adopebevaiga on Nov 20, 2019 6:30:23 GMT -5
|
|
|
Post by eirozxonacuku on Nov 23, 2019 7:17:36 GMT -5
|
|